Ungabeka kanjani laminate?

I-universality of the laminate iwukuthi ingabekwa phezu kwezinhlobo ezahlukene ezahlukene: ukhonkolo, i-samente isikolo, i-self-leveling floor, i-linoleum, i-parquet egayiwe kanye namathayili we-ceramic. Imfuneko eyinhloko yukuthi iphansi kumele libe lihlanzekile, elomile ngisho.

Indlela yokubeka i-laminate ngokwakho - izincomo ezisebenzayo

Ukufakwa okulula kwe-laminate ngokuyinhloko ngenxa yendlela ama-panel axhunyiwe ndawonye. Esikhathini sethu, sizosebenzisa ukukhiya uhlobo lokuchofoza okulula.

Yingakho iqoqo lamathuluzi alincane: izinga eliphansi lika-1.5, i-jigsaw, i-drill, i-tape isilinganiso, ummese, i-tape yokunamathisela, i-wedges kanye nezigaba eziyisisekelo.

Ngaphandle kwamapaneli okubhubhisa, i-film barrier ifilimu enobukhulu buka-0.2 mm kanye ne-substrate okungenani u-2 mm kuyadingeka.

Ngaphambi kokuqala ukufakwa, khumbula ukuthi uma ukuthenga impahla okudingayo ukucabangela izindawo ze-niche, u-5% wendawo yonke yengeziwe ekuguquleni.

Ngemuva kokuthengwa kwemikhiqizo, kumele kudlule ukunakekelwa kwemithi, okungukuthi, izinga lokushisa kanye nomswakama kufanele lilingane nama-indices ekamelweni lapho umsebenzi uzokwenziwa khona. Ukwenza lokhu, shiya i-laminate kuleli kamelo izinsuku ezimbili. Imingcele evumelekile yomsebenzi - umswakama 40-65%, izinga lokushisa lama-18-22 degrees. Emakamelweni anomswakama ophakeme (ngaphezu kuka-70%), lesi sigaba sesitezi asinakwenziwa. siyaqhubeka nendlela yokubeka kahle phansi i-laminate floor.

Indlela yokubeka kahle laminate ngezandla zakho?

1. Sibheka ukulinganisa kwesitezi esivele sikhona ngobude obuphansi buka-1.5 m. Iphutha elivumelekile li-2 mm / m.
2. Isivikelo esivela kumswakama sizosebenza njenge-wind barrier film, ebeka phezu kwendawo yonke, lapho kuyoba khona i-laminate. Futhi faka ifilimu ezindongeni ngesivumelwano esenzelwe i-plinth. Kudingekile ukwenza ifilimu iguqulwe ngamasentimitha angu-15 bese isilungisa isikhundla nge-tape engamelana nomswakama.
3. Isendlalelo esilandelayo yi-substrate.
4. Ngaphambi kokufaka iphaneli ngokuqondile, hlola iziphambeko.
5. Okulandelayo, udinga ukunquma indlela izinto ezibekiwe ngayo. Kunezinketho eziningi. Nge-offset ye-½ ubude - umugqa wokuqala uqala ngepaneli eqinile, elandelayo - nge-cut to half, futhi kanjalo.

Nge-offset ye-1/3, okungukuthi, umugqa wokuqala uyipaneli eqinile, eyesibili inqunywa yi-1/3, yesithathu ngu-2/3.

Indlela "esakhiweni esinqunyiwe" kungenzeka.

Hlola i-angle ye-laminate odongeni. Umthamo we-degrees 45 kungenzeka.

6. Bala ububanzi bomugqa wokugcina, uma isibalo singaphansi kuka-50 mm, umugqa wokuqala kufanele unciphise ububanzi.

Esimweni sethu, ukufakwa kuyingqayizivele efasiteleni. Ukugxilwa kwamapaneli kuyinto eyinqaba kakhulu: faka i-groove yabo emgodleni bese ushaya ngesibindi noma umlenze we-raber phezu kokujoyina.

7. Uma kuziwa ekholomu , ama-flaps, ama-niches, izindonga, shiya igebe phakathi kwezinto kanye nezinto zokwabiwa kwe-10 mm. Ngokuqondene nefreyimu yomnyango, ingaqedwa.
8. Uhlu olulandelayo ohlangothini olude lubekwe kuma-degree angu-20 ku-crest futhi lubekwa ngokuzungezile. Shift ekuhlanganiseni - hhayi ngaphansi kuka-40 cm.

Esinye isici kulabo abafuna ukwazi ukubeka laminate ekamelweni. Njengoba ubukhulu bekamelo bube ngaphezu kwe-8x6 m nobukhulu beplate ka-7-10 mm, umgudu wokunciphisa we-2-3 cm uyadingeka. Okufanayo kusebenza ezindaweni ezingaphezulu kuka-10x12 m ngobukhulu bomkhiqizo we-10 mm.

9. Umswakama ufakwe uphawu, obambelelwe kanje:

Ukufakwa kwe-laminate sekuphelile.

10. Manje qala ukulungisa i-plinth.
11. Kuyadingeka ukususa udoti nge-vacuum cleaner kanye nendwangu emanzi.

Utholiwe:

Ukuvikela i-laminate emonakalweni, ngaphansi kwezihlalo kungcono ukubeka amashabhu akhethekile, nasemilenzeni yefenisha ukuze unamathele ama-pads azizwayo.